New cedar picket fence and gate in a Wenatchee backyard
Fencing & Gates

Fence Builder in Wenatchee, WA

Cedar privacy fencing, picket and ranch rail, and custom gates built to stand straight through valley wind, sun and freeze-thaw winters.

Fences built for valley conditions, not catalog conditions

A fence in the Wenatchee Valley takes a beating that fences in milder climates never see. Summer sun dries and cups thin pickets, winter freeze-thaw heaves shallow footings, and wind coming down the river finds every weak post. So we build from the ground up: properly sized concrete footings set below frost depth, drainage at the post base, upsized and braced gate posts, and framing lumber rated for ground contact where it belongs.

Above grade, we work primarily in cedar because it holds up to sun and moisture without chemical treatment and takes stain beautifully. Styles include board-on-board and shadowbox privacy fence for full screening with airflow, horizontal cedar for a modern look, classic dog-ear and picket for front yards, and ranch or split rail for acreage and orchard property lines. We also build hybrid systems that pair steel posts with cedar facing when longevity matters more than a wood-only look.

Layout is part of the job. We walk the line with you, confirm property boundaries and setbacks, plan grade transitions and stepped panels on slopes, and route around irrigation, rock and mature trees rather than fighting them. On sloped Wenatchee lots that planning is the difference between a fence that follows the land and one that leaves awkward gaps at the bottom.

Gates that still swing straight in ten years

Gates are where most fences fail, so we build them like a separate structure. Frames are welded or steel-cornered instead of screwed lumber, hinges are adjustable and heavy duty, and posts are upsized, braced and sometimes doubled for wide double-drive openings. Options include walk gates, double-drive gates for equipment and trailers, arched tops, matching arbors, and privacy gates with concealed latches or keypad hardware.

We also handle fence repair and replacement: swapping out failed posts, resetting leaning sections, replacing storm-damaged panels and matching existing fence lines so an addition does not look like a patch. If you are also building a deck or cover, we sequence the fence so the yard is only torn up once.

Licensed, bonded and insured under Lic # MINSKCL751CD, with clean job sites and honest timelines from the first walk-through to the final gate adjustment.

  • Cedar privacy, board-on-board and shadowbox
  • Picket, ranch rail and split rail fencing
  • Custom walk, double-drive and arched gates
  • Concrete footings set below frost depth
  • Slope-stepped layouts for hillside lots
  • Fence repair, post resets and replacement
Cedar picket fence and gate installed in a Wenatchee backyard
Cedar picket fence and gate installed in a Wenatchee backyard
Cedar boards and rail detail showing our finish work
Cedar boards and rail detail showing our finish work
Upper-level deck with cedar posts and railing in East Wenatchee
Upper-level deck with cedar posts and railing in East Wenatchee
Common Questions

Frequently asked

How long does a fence installation take?

A typical residential yard of 150 to 250 feet takes two to five days on site, including post setting, a concrete cure period, and panel and gate installation. Larger properties, rock, or heavy slope add time. Layout and material ordering usually add one to three weeks before we start.

Do I need a permit to build a fence?

Most standard residential fences under the height limit in Wenatchee, East Wenatchee, and Chelan and Douglas counties do not need a building permit, but height limits, corner-vision triangles and setback rules still apply, and taller or retaining fences can require one. We check local requirements and confirm property lines with you before digging.

What fence materials and styles do you build?

Cedar privacy fence in board-on-board, dog-ear, shadowbox and horizontal styles, cedar picket fence, ranch and split rail, pressure-treated framing with cedar or composite facing, and metal-post hybrid systems. Gates can be single, double-drive or arched, built with steel frames and heavy hinges so they never sag.

How do you keep gates and posts from failing?

Posts go in properly sized concrete footings below frost depth with drainage at the base, and gate posts are upsized and braced. Gate frames are welded or steel-cornered rather than just screwed lumber, and we use adjustable heavy-duty hinges. That is why our gates still swing straight years later.

What is your fencing service area?

We install fencing throughout Chelan and Douglas counties, including Wenatchee, East Wenatchee, Cashmere, Monitor, Leavenworth, Malaga, Rock Island and Lake Chelan.

Let's talk about your project

Serving Wenatchee, East Wenatchee, Cashmere, Leavenworth, Chelan and the rest of Chelan & Douglas counties. Licensed, bonded and insured. Lic # MINSKCL751CD.